Zenmuse P1

Efficiency through Flexible Full-frame Photogrammetry

The Zenmuse P1 integrates a full-frame sensor with interchangeable fixed-focus lenses on a 3-axis stabilized gimbal. Designed for photogrammetry flight missions, it takes efficiency and accuracy to a whole new level.

Accuracy without GCPs
3 cm horizontally / 5 cm vertically [1]
High Efficiency
3 km2 covered in a single flight [2]
45 MP Full-frame Sensor
3-axis Stabilized Gimbal
Smart Oblique Capture
Global Mechanical Shutter [3]
Shutter Speed 1/2000 Seconds
TimeSync 2.0 - synchronization
at the microsecond level

Your Go-to Tool for Aerial Photogrammetry

Efficiency to Cover It All
Full-frame Camera

  • 45MP Full-frame Sensor
  • 4.4μm Pixel Size
  • Low-noise, high sensitivity imaging extends daily operational time
  • Take a photo every 0.7 s during the flight
  • TimeSync 2.0 aligns the camera, flight controller, RTK module, and gimbal at the microsecond level

Flexibility to Capture It All
Multiple Fixed-focus
Lens Options

  • Global Mechanical Shutter, Shutter Speed 1/2000 seconds
  • Sends the median exposure pulse in microseconds
  • Supports 24/35/50mm lenses with DJI DL mounts

Work Smart, Work Fast

Smart Oblique Capture

Cover 7.5 km2 [4] in a single workday with the P1. Elevate the efficiency of your oblique photography mission using Smart Oblique Capture, where the gimbal automatically rotates to take photos at the different angles needed. Only photos essential to the reconstruction will be taken at the edge of the flight area, increasing the efficiency of post processing by 20%[5] to 50%[6].

A Mission Mode for Any Scenario

Fieldwork Report

Verify data quality immediately post-flight by checking the position data and number of the images acquired, as well as RTK status and positioning accuracy.

Request a Quote

The P1 is available for order through official DJI Dealers. Contact us below for the team to reach out.